Terroza Putty is water resistant white cement based putty for cement, plaster walls & ceilings. Terroza Putty can be applied even on moist surfaces (Internal / External).
It has more adhesive strength, durability & increases the life of paints. Terroza Putty though white cement based, does not require water curing. It renders a smooth & durable surface suitable for all kinds of paints.
Surface preparation
Remove all the loose adhering material from the wall surface with the help of emery stone, putty blade or wire brush. Moisten the wall with sufficient quality of clean water.
Mixing of Terroza Putty
Mix Terroza Putty with 35-40% clean water slowly to make a paste. Continue the mixing of material for 10-15 minutes till a uniform paste is formed. It is readymade wall putty for which no primer is required.
Application on surface
Apply first coat of Terroza Putty uniformly on already moistened surface with the help of putty blade or trowel. Allow the surface to dry for at least three hours and then apply a second coat of putty. Leave the surface to dry completely. Always prepare the required quantity of Terroza Putty and use it within three hours of mixing with water. The total thickness of both the coats should be limited to a maximum of 1.5 mm. After complete drying of the surface, if needed, the surface should be rubbed with fine waterproof emery paper. The surface is now ready for painting.
Note : The information given in this Leaflet is for general guidance only. Specific instructions for various site conditions can be provided on demand. However the company will not be responsible for any wrong application of the product.
Precautions while using
Though it contains only non toxic materials still care should be taken to avoid dust inhalation while mixing and handling. in case of contact with eyes or mouth, wash with plenty of water.
Keep it in dry place and out of reach of children.
Storage
Terroza Putty should be stored in a dry place.
Packing
Terroza Putty is available in 20 Kg & 40 Kg. Packs.
