Terroza Cool PlasterApril 13, 2023
Wall PuttyApril 14, 2023
An advanced lime based ready to use plaster & mortar
Terroza Ready Plaster is an advanced thermal insulation ready to use plaster & mortar. It is a green technology product which makes the building eco-friendly and safeguard it from the global warming. Its very ideal to be used in modern constructions and to conserve traditional heritage buildings.
Sand, Hydrated Lime, White Cement, Glass Fibres and Acrylic Polymers.
In current global warming scenario the use of lime product can save approximately 80% of the CO2 release compared to ordinary cement plaster. One single residence can save between 5000 to 10000 lbs of CO2 emission. Each year environmentally conscientious builders and architects & individual user are saving several million pounds of CO2 release by simply avoiding the use of cement and choosing lime based products.
Shrinkage cracks in mortar and render are virtually eliminated due to its hydraulic setting characteristics.
BREATHABLE (High Porosity, High Permeability)
In our view, sustainable structures should be designed to breathe, just as we do. If a building envelope is too air tight, moisture can become trapped inside.
One of the outstanding benefits of using lime is its high porosity. Ready Plaster allows you to build permeable wall systems, eliminating standing condensation. A lime-built structure “breathes” and enabling moisture to evaporate.
If your building in a damp or tropical climate, preventing moisture damage is especially critical. Use of Ready Plaster will enable you to build structures that prohibit moisture, bacteria, mold and mildew from forming within the building envelope
Ready Plaster offer thermal comfort and protection, It supports in energy saving system.
Ready Plaster can tolerate damp and sea-side applications that would normally de-laminate acrylic-based plasters, latex-based paints and Gypsum-based plasters.
LOW THERMAL CONDUCTIVITY
Ready Plaster plays a pivotal role in creating optimal thermal protection. When designed correctly, a building finished with lime will keep inhabitants warmer in cooler climates and cooler in warmer climates.
It is supplied in powdered form; it is pretty much the same as mixing and working with modern cement. Mixed to the right consistency, Ready Plaster lime mortar & plaster are beautiful materials to work with.
Use of lime will enable you to build structures that prohibit moisture, bacteria, mold, and mildew from forming within the building envelope.
Of many issues at hand with non-sustainable structures, Indoor Air Quality is a critical concern. Artificial, chemical-based structural paints and plasters have been cited as a major factor in releasing poisonous air pollutants and airborne bacteria.
When a structure is properly designed with lime products, you eliminate VOCs, mildew, mold, and bacterium while creating huge advantages to the structural elements of the building.
Using Ready Plaster, places you directly in line with truly sustainable building practices.
A must usable product to make your building healthly beautiful.
|TECHNICAL DATA PROPERTY
|Maximum grain size
||15-20/Sqft/ 40 Kg bag at thickness of 1.25cm
||No curing required
|Recommended mixing ratio
||8-9 Ltrs water/ bag
The surface need to be cleaned and made free from grease and loose particles. The porous and absorbent substrates need to be pre-wetted prior to application of TERROZA READY PLASTER to prevent premature loss of water from the plaster. This will ensure that thin layer can be applied without cracking problems and proper cement hydration and adherence of the mortar to the substrate is attained.
- Use 8-9 liters of water approximately for 40 kg TERROZA READY PLASTER. Mix the clean water with TERROZA READY PLASTER for 4-5 minutes with hand or stir better with mechanical mixer to achieve a good consistency. Do not over mix.
- Allow mixture to stand for 5 minutes for additives to dissolve and after re-mix, plaster is ready for use
- Apply plaster to the substrate, using some pressure while finishing with a steel trowel or wooden float to ensure optimum bonding of the plaster to the substrate surface.
- TERROZA READY PLASTER can be either hand- applied or spray machine-applied.
- TERROZA READY PLASTER can be used in exterior and interior surface.
PACKAGING 40kg HDPE bags.
STORAGE Dry and protected.
This product undergoes third party and in-house monitoring, using a quality management system which conforms to the current international standard EN ISO 9001 and the environmental standard ISO 14001.